SAVE Your Basement With The
|Basementsaver WP3 Water Powered Backup Sump Pump
|Pump Up To 2,000 gal/hr
Basementsaver WP3 water powered sump pump provides ultra-reliable maintenance-free protection for large residential or commercial basements with very high sump flow and normal city water pressure:
If you know your city water pressure (with all faucets and appliances switched off) you can use the table above to estimate how the WP1 Water Powered Sump Pump will perform in your basement, assuming 10ft vertical lift to discharge.
Note: sufficient Water Pressure does not guarantee sufficient Water Flow. Perform the simple 20 second Bucket Test to make sure the WP3 pump will work correctly in Your basement!
NEW 2015 MODEL
5 YEAR WARRANTY
ON ALL WP3 SUMP PUMPS
FREE - Basementsaver High
Water Detector & Alarm System
We're giving away a FREE Basementsaver High Water Detector & Alarm System with every WP3 Water Powered Sump Pump!
Now Basementsaver makes it easier than ever for You to install your own Water Powered Sump Pump:
Other people who purchased a Basementsaver WP3 Water Powered Sump Pump also bought:
Water Supply Connection Kit
Rated to 230psi
Solderless Push-Fit Plumbing Kit
Everything That You Need To Easily Connect Your Water Powered Sump Pump To Your Water Supply Using 3/4" Copper Or PEX Plastic Pipe
(3/4" pipe not included - buy locally)
The Basementsaver WP3 water powered backup pump has been designed for simple installation - DOWNLOAD THE WP3 PUMP INSTALLATION MANUAL:
The Basementsaver WP3 emergency backup pumping system represents the most advanced water powered backup sump pump technology currently available, and is Your best choice for most commercial applications with very high basement sump flow rates:
Run This Simple Test To Make Sure A WP3 Pump Will Work In Your Basement:
Turn Off All Faucets / Appliances That Use Water & Find An Unrestricted Hose Spigot
Disconnect And Remove Your Hosepipe, Then Fully Open Your Hose Spigot
Quickly Place A 5 Gallon Bucket Under The Flowing Water And Begin Timing
Your Hose Spigot Must Be Able To Fill The 5 Gallon Bucket In 20 Seconds Or Less!
$SAVE$ - Install Your Own Basementsaver Water Powered Sump Pump
Basementsaver Water Powered Sump Pumps Are Specifically Designed For The Simplest Possible Installation By The Average Homeowner
Easy Discharge Tee:
|Here's What You Get:
|You'll Also Need:
Install Your WP3 Backup Pump water supply the easy way with a Basementsaver 3/4" Easy-Fit water connection plumbing kit. The push-on fittings are designed for use with flexible or rigid copper tubing, or PEX plastic tubing, or even mixed copper / PEX combinations (tubing is NOT included - buy locally). All fittings are rated to 230psi and suitable for use with all Basementsaver water powered emergency backup sump pumps.
Each kit includes a push-on 'tee', adapter, elbow, ball valve, pipe supports, screws and an 18 inch Flexible Stainless Steel Hose to simplify alignment of Your water powered backup sump pump. Complete Instructions are included to enable easy tee-in connection to your existing 3/4" copper or plastic main water supply tube (downstream of your water meter).
You Do Not Need A PayPal Account, You Can Use Your Credit Card To Checkout
BUY Your Basementsaver WP3 Emergency Water Powered Backup Sump Pump
NOW ON SALE:
Basementsaver Backup Sump
Pump Customer Support
Your Basementsaver Water Powered Backup Sump Pump is specifically designed for ultra-reliable performance with zero maintenance and easy installation.
For Foolproof & Leakproof Water Powered Sump Pump Installation
Save A Lot Of Time And Make It Easy On Yourself When Plumbing Your Pump Unit Into Your City Water Supply. Get An Optional Easy-Fit Plumbing Kit
BUY Your Optional
OUT OF STOCK
Web Marketing Strategy & Solution by 1stFlash Web Marketing Consultants, New York